F9AX - Under Offer | Multihull World

Broker Comments

It's reported that over 300 F-9 variants have been built world wide. This particular vessel was started by a previous owner and continued by the present owner who has bought much of the deck hardware and built some of the interior. He would be happy to help complete the vessel with the new owner. The main construction tasks are primarily complete. This will be a very exciting and powerful racer/cruiser when finished at a fraction of the price of a new boat. PLEASE NOTE: This vessel will need to be taken away by road. No trailer included.

Boat Details

Length
9.15m / 30 Ft

Draft
0.4m / 1 Ft / Max: 1.7m / 6 Ft

Berths
4

Beam
4.27m / 14 Ft

Displacement
1.96 Tonnes

Keel
Centreboard

Construction

Structure
GRP/Carbon/Selfbuild

Builder
Owner

Designer
Ian Farrier

Rig

Rig
Aluminium rotating mast drilled for rigging, but rigging still required. Aluminium bowsprit, modified to swing vertically and fit in pulpit when necessary. All loose parts, fittings, spare parts and construction materials associated with the F-9AX project are included in the sale

Sails

Sail	Area	Type	Year	Condition
Spinnaker		UK SAILS	n/a	UNUSED

Accommodation

Comments
Cabin layout is as F32 with double doorway through the forward bulkhead, access to heads through forward bulkhead - two doubles in 2 cabins, 1 chemical toilet, cold water system, 100L capacity.
Not suitable to sailaway currently.

Hulls Headroom

Saloon Headroom
1.8m / 6 Ft

Engine

Make
None

Type

Details

General Equipment

Equipment	Make	Model
Genoa track and blocks
Foredeck hatch	600x600
Mainsheet track, block and car
Cleats and mainsheet
Perspex washboards/windows
Cabin cockpit hatch
Pushpit rail/folding seat
Pulpit (with provision for bowsprit when not in use)
Frige inc freezer section with compressor - keel cooler	Penguin
Water tank	Plastimo
Chemical toilet
Basin and waste to galley	True design
Stainless wash basin to wash area
All loose parts, fittings, spare parts and construction materials associated with the F-9AX project are included in the sale
Deck gear - complete
Full original and electronic Farrier plan set with vessel, including Sail No. 254, build/licence documentation and available plan updates and correspondence
Rudder/rudder stock transom hung
Cabin table also used as cockpit table
Galley food store/cupboard
Mainsheet track with cars/end stop	Ronstan	Series 32
Genoa track and sliders	Ronstan	T
Farrier F-9AX, Sail No. 254
the full original and electronic Farrier plan set, including all updates
the Farrier build licence / right-to-build documentation and any change-of-ownership correspondence
the Mark II carbon fibre floats
the complete beam assemblies and associated fittings
complete Farrier Marine (NZ) F-32 daggerboard rudder package adapted for the F-9/F-31
the Corsair centreboard
all loose parts, fittings, spare parts, construction materials, templates and moulds belonging to or acquired for the F-9AX project

Navigation Equipment

Equipment	Model	Year
Depth/speed/distance/water temp	Raymarine	2026
Transducer	Raymarine	2026
Compass	Suunto	2019

Safety Equipment

Equipment	Quantity	Make
2 speed winches	3	Anderson 40
Clutches	4	Spinlock XL
Clutches	2	Spinlock XA

Electrical Equipment

Equipment	Quantity	Make	Capacity
Self tailing winches - 2 speed	2	Anderson 40ST
Cupboard with circuit breaker		Blue Sea	some wiring needed
Battery monitor		NASA BM1

Ground Tackle

Dinghy

These details are prepared from information provided by the vendor and are intended as a guide to give a fair description of the vessel but their accuracy cannot be guaranteed and they do not constitute part of any contract. Survey by a qualified marine surveyor is strongly recommended.